18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo
18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water Output Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering Direction | Outside-in |
| Membrane Material | Reinforced Modified PVDF |
| Precision | 0.03 micron |
| Membrane Area | 25m2 |
| Membrane ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH Range | 5-9 (2- 12 when washing) | Neutral PH is better for bacterial culture |
| Particle Diameter | <2mm | Prevent sharp particles to scratch membrane |
| Oil & Grease | ≤2mg/L | Prevent membrane fouling/sharp flux decrease |
| Hardness | ≤150mg/L | Prevent membrane scaling |
Application Parameters
| Designed Flux | 15~40L/m2.h |
| Backwashing Flux | Twice the designed flux |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested Operating Pressure | ≤-35KPa |
| Maximum backwashing Pressure | 100KPa |
| Operating Mode | Continuous opeartion, intermittent backwashing air flushing |
| Blowing Mode | Continuous Aeration |
| Aeration Rate | 4m3/h.piece |
| Washing Period | Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
Adhering to your principle of quality, assistance, performance and growth, we have now gained trusts and praises from domestic and international customer for 18 Years Factory Mbr System - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: Palestine, Lisbon, Brunei, Many goods fully conform to rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Nana from Bulgaria - 2017.06.19 13:51
Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
By Andrea from British - 2018.06.26 19:27
Write your message here and send it to us
