18 Years Factory Mbr System - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To consistently enhance the management method by virtue of the rule of sincerely, fantastic religion and high quality are the base of business development, we extensively absorb the essence of associated goods internationally, and constantly acquire new merchandise to satisfy the needs of shoppers for Membrane Separation In Food Processing , Micro Filtration , Uf Membrane Use , Special emphasis on the packaging of products to avoid any damage during transportation,Detailed attention to the valuable feedback and suggestions of our esteemed clients.
18 Years Factory Mbr System - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, spring water, or other sterile liquid.
  • Drinking treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity <0. 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 16m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ160mm*1415mm
Connector Size DN32

Application Data:

Pure Water Flux 4,700L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

18 Years Factory Mbr System - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures

18 Years Factory Mbr System - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures


Related Product Guide:

Each individual member from our large performance revenue crew values customers' needs and company communication for 18 Years Factory Mbr System - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: Paraguay, California, Hamburg, If you need any of our products, or have other items to be produced, please send us your inquiries, samples or detailed drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Susan from Nigeria - 2018.09.29 17:23
    It is really lucky to meet such a good supplier, this is our satisfied cooperation, I think we will work again!
    5 Stars By Page from USA - 2018.06.28 19:27
    Write your message here and send it to us