Best quality Membrane Bioreactor - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been committed to offering easy,time-saving and money-saving one-sgood purchasing service of consumer for Mbr Treatment , Membrane Filtration Unit , Water Filtration Membrane , We will provide high-quality products and excellent services at competitive prices. Start benefiting from our comprehensive services by contacting us today.

Best quality Membrane Bioreactor - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo Detail:

Applications

Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient	Effect
SS, Particles > 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Bacteria, Viruses	> 4 log
Turbidity	<0. 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products.

Product Parameters

product-description1

Technical Parameters

Filtering Type	Inside-out
Membrane Material	Modified PVC
MWCO	100K Dalton
Membrane Area	4.8m2
Membrane ID/OD	1.0mm/1.8mm
Dimensions	Φ90mm*1190mm
Connector Size	DN25 Union Joint

Application Data

Pure Water Flux	1,500L/H (0.15MPa, 25C)
Designed Flux	35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.2MPa
Maximum Working Temperature	45C
PH Range	Working: 4-10; Washing: 2-12
Operating Mode	Cross-flow or Dead-end

Feeding Water Requirements

Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity	≤ 15NTU
Oil & Grease	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Continuous Residual Chlorine	≤ 5ppm
COD	Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters

Maximum Backwashing Pressure	0.2MPa
Backwashing Flow Rate	100-150L/m2.hr
Backwashing Frequency	Every 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 times per day
CEB Duration	5-10min.
CIP Frequency	Every 1-3 months
Washing Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material

Component	Material
Membrane	Modified PVC
Sealing	Epoxy Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

We have now probably innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for Best quality Membrane Bioreactor - UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Tap Water Treatment – Bangmo , The product will supply to all over the world, such as: Yemen, venezuela, Argentina, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our to serve you.

Membrane Pressure