factory customized Ultrafiltration Water System - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Water Filter Membrane , Bioreactor Wastewater Treatment , Cross Flow Membrane Filtration , In a word, when you choose us, you choose a ideal life. Welcome to go to our manufacturing unit and welcome your get! For further more inquiries, remember to usually do not be reluctant to get in touch with us.
factory customized Ultrafiltration Water System - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo Detail:

Product Overview

UFc200BL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, mountain spring water and other sterile liquid.
  • Drinking treatment of tap water, surface water, well water, river water, etc.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity < 0.1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU.

Product Parameters

product-description1

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 34m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ200mm*1710mm
Connector Size DN50 Clamping

Application Data:

Pure Water Flux 10,000L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:


Related Product Guide:

We not only will try our great to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for factory customized Ultrafiltration Water System - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Mineral Water Treatment – Bangmo , The product will supply to all over the world, such as: Auckland, Liberia, Johor, Qualified R&D engineer might be there for your consultation service and we will try our to meet your requirements. So you should feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we are going to surely present you with satisfactory quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we'll make our efforts to build a solid co-operation and transparent communication work with our companions. Above all, we're here to welcome your inquiries for any of our merchandise and service.
In China, we have purchased many times, this time is successful and satisfactory, a sincere and realiable Chinese manufacturer!
5 Stars By Joseph from Mexico - 2017.10.27 12:12
The company keeps to the operation concept scientific management, high quality and efficiency primacy, customer supreme, we have always maintained business cooperation. Work with you,we feel easy!
5 Stars By Jenny from Milan - 2017.02.28 14:19
Write your message here and send it to us