English
factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Featured Image
  • factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We'll make each hard work to become excellent and excellent, and speed up our measures for standing from the rank of intercontinental good -grade and high-tech enterprises for Water Treatment Membrane , Uf Process , Membrane Module , Our service concept is honesty, aggressive, realistic and innovation. With your support, we will grow much better.
factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No. Item Output Index
1 TSS ≤1mg/L
2 Turbidity ≤1
3 CODcr Removal rate depends on the bio-chemicalperformance & designed sludge concentration(Instant removal rate of membrane is ≤30% without

bio-chemical function)
4 NH3-H

Specifications

product-description1

Technical Parameters

Structure Outside-in
Membrane Material Reinforced Modified PVDF
Pore Size 0.1 micron
Membrane Area 30m2
Membrane ID/OD 1.0mm/2.2mm
Size 1250mm×2000mm×30mm
Joint Size Φ24.5mm

Application Parameters

Designed Flux 10~25L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode 8/9min on+2/1min pause
Aeration Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 2~4h; CEB every 2~4 weeks;CIP every 6~12 months.           *Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not   easy to foul.

Item Value Remark
PH Operate: 5-9Wash: 2-12 Neutral PH is good for bacteria culture
Particle Diameter <2mm Sharp particles will scratch membrane
Oil & Grease ≤2mg/L High content will affect membrane flux
Hardness ≤150mg/L High content will cause fouling

Component Material

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS
Product detail pictures:

factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo detail pictures

Related Product Guide:
Our pursuit and firm aim should be to Always fulfill our buyer requirements. We carry on to produce and structure high quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for factory low price Cross Flow Filtration System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Muscat, Armenia, Luxembourg, What is good price? We provide customers with factory price. In the premise of good quality, efficiency will have to be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers' requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply products and solutions in time. Sincerely hope we could have long term business relationship.
    • The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
    5 Stars By Nicci Hackner from Juventus - 2018.10.09 19:07
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Daniel Coppin from Turin - 2017.06.25 12:48
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close