Sincerity, Innovation, Rigorousness, and Efficiency is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Membrane Water Filter , Ultra Filtration , Ultra Filtration System , We welcome all of the clients and friends to contact us for mutual benefits. Hope to do further business with you.
Factory Promotional Membrane In Water Purifier - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
No. |
Item |
Water Output Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤ 1 |
Specifications
Size
Technical Parameters
Structure |
Outside-in |
Membrane Material |
Reinforced Modified PVDF |
Precision |
0.1 micron |
Membrane Area |
25m2 |
Membrane ID/OD |
1.0mm/ 2.2mm |
Size |
785mm×2000mm×40mm |
Joint Size |
DN32 |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane (PU) |
Housing |
ABS |
Application Parameters
Designed Flux |
10~25L/m2.h |
Backwashing Flux |
30~60L/m2.h |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested Operating Pressure |
0~-35KPa |
Maximum backwashingPressure |
100KPa |
Operating Mode |
9min Operation+1min Break/8min Operaetion+2min Break |
Blowing Mode |
Continuous Aeration |
Aeration Rate |
4m3/h.pc |
Washing Period |
Clean water backwashing every 2~4h; CEB every 2~4 weeks; CIP every 6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
Item |
Value |
PH Range |
5~9 (washing: 2~12) |
Particle Size |
<2mm, no sharp particles |
Oil & Grease |
≤2mg/L |
Hardness |
≤150mg/L |
Product detail pictures:
Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the good benefit for our customers for Factory Promotional Membrane In Water Purifier - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Plymouth, France, Georgia, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!