Factory supplied Membrane Filtration Wastewater Treatment - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Mbr Technology , Membrane And Water Treatment , Hollow Fiber Filter , We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.
Factory supplied Membrane Filtration Wastewater Treatment - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, spring water, or other sterile liquid.
  • Drinking treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity <0. 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 16m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ160mm*1415mm
Connector Size DN32

Application Data:

Pure Water Flux 4,700L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

Factory supplied Membrane Filtration Wastewater Treatment - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures

Factory supplied Membrane Filtration Wastewater Treatment - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures


Related Product Guide:

The really abundant projects administration experiences and just one to one particular provider model make the substantial importance of organization communication and our easy understanding of your expectations for Factory supplied Membrane Filtration Wastewater Treatment - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: French, Norwegian, South Korea, To keep the leading position in our industry, we never sgood challenging the limitation in all aspects to create the ideal products. In his way, We can enrich our life style and promote a better living environment for the global community.
  • The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Amber from Lesotho - 2017.06.19 13:51
    High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a nice choice.
    5 Stars By Joa from Vietnam - 2017.09.28 18:29
    Write your message here and send it to us