It is a good way to enhance our products and solutions and repair. Our mission will be to build creative solutions to consumers with a great experience for Osmosis Membrane , Ultra Filter Membrane , Ultra Filter Membrane , We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence.
Fast delivery Osmosis Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
No. |
Item |
Water Output Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤ 1 |
Specifications
Size
Technical Parameters
Structure |
Outside-in |
Membrane Material |
Reinforced Modified PVDF |
Precision |
0.1 micron |
Membrane Area |
25m2 |
Membrane ID/OD |
1.0mm/ 2.2mm |
Size |
785mm×2000mm×40mm |
Joint Size |
DN32 |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane (PU) |
Housing |
ABS |
Application Parameters
Designed Flux |
10~25L/m2.h |
Backwashing Flux |
30~60L/m2.h |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested Operating Pressure |
0~-35KPa |
Maximum backwashingPressure |
100KPa |
Operating Mode |
9min Operation+1min Break/8min Operaetion+2min Break |
Blowing Mode |
Continuous Aeration |
Aeration Rate |
4m3/h.pc |
Washing Period |
Clean water backwashing every 2~4h; CEB every 2~4 weeks; CIP every 6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
Item |
Value |
PH Range |
5~9 (washing: 2~12) |
Particle Size |
<2mm, no sharp particles |
Oil & Grease |
≤2mg/L |
Hardness |
≤150mg/L |
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of front end of range both of those on solution and repair for Fast delivery Osmosis Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Comoros, Mauritania, Oslo, We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.