Hot sale Ultrafiltration Membrane - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo
Hot sale Ultrafiltration Membrane - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water Output Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering Direction | Outside-in |
| Membrane Material | Reinforced Modified PVDF |
| Precision | 0.03 micron |
| Membrane Area | 30m2 |
| Membrane ID/OD | 1.0mm/ 2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint Size | Φ24.5mm |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH Range | 5-9 (2- 12 when washing) | Neutral PH is better for bacterial culture |
| Particle Diameter | <2mm | Prevent sharp particles to scratch membrane |
| Oil & Grease | ≤2mg/L | Prevent membrane fouling/sharp flux decrease |
| Hardness | ≤150mg/L | Prevent membrane scaling |
Application Parameters
| Designed Flux | 15~40L/m2.h |
| Backwashing Flux | Twice the designed flux |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested Operating Pressure | ≤-35KPa |
| Maximum backwashing Pressure | 100KPa |
| Operating Mode | Continuous opeartion, intermittent backwashing air flushing |
| Blowing Mode | Continuous Aeration |
| Aeration Rate | 4m3/h.piece |
| Washing Period | Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Hot sale Ultrafiltration Membrane - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: kazakhstan, Belgium, Barcelona, We now have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.
By Jessie from Canada - 2017.09.16 13:44
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Penelope from Vietnam - 2017.07.07 13:00
Write your message here and send it to us
