It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Hollow Fiber Filter , Ultrafiltration Pressure , Hollow Fiber Membrane Module , We welcome buyers, business enterprise associations and good friends from all sections in the planet to get hold of us and request cooperation for mutual gains.
Hot Selling for Filter Fiber - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
No. |
Item |
Water Output Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
Filtering Direction |
Outside-in |
Membrane Material |
Reinforced Modified PVDF |
Precision |
0.03 micron |
Membrane Area |
30m2 |
Membrane ID/OD |
1.0mm/ 2.2mm |
Size |
1250mm×2000mm×30mm |
Joint Size |
Φ24.5mm |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane (PU) |
Housing |
ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
Item |
Limit |
Remark |
PH Range |
5-9 (2- 12 when washing) |
Neutral PH is better for bacterial culture |
Particle Diameter |
<2mm |
Prevent sharp particles to scratch membrane |
Oil & Grease |
≤2mg/L |
Prevent membrane fouling/sharp flux decrease |
Hardness |
≤150mg/L |
Prevent membrane scaling |
Application Parameters
Designed Flux |
15~40L/m2.h |
Backwashing Flux |
Twice the designed flux |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested Operating Pressure |
≤-35KPa |
Maximum backwashing Pressure |
100KPa |
Operating Mode |
Continuous opeartion, intermittent backwashing air flushing |
Blowing Mode |
Continuous Aeration |
Aeration Rate |
4m3/h.piece |
Washing Period |
Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust
according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science as well as the theory of quality the basic, have confidence in the very first and management the advanced for Hot Selling for Filter Fiber - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Poland, Ghana, Uruguay, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the high quality products we offer, effective and satisfying consultation service is supplied by our specialist after-sale service group. Solution lists and detailed parameters and any other info weil be sent to you timely for the inquiries. So please get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.