Hot Selling for Filter Fiber - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the perception of Creating products of front end of range and earning mates with people today from all over the world, we constantly put the desire of consumers in the first place for Water Treatment , Pvdf Membrane Water Filter , Ultrafiltration Pressure , We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Hot Selling for Filter Fiber - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo Detail:

Product Overview

UFf225 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

Applications

  • Drinking water treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity < 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description112

Technical Parameters:

Filtering Type Outside-in
Membrane Material Modified PVDF
MWCO 200K Dalton
Membrane Area 60m2
Membrane ID/OD 0.8mm/1.3mm
Dimensions Φ225mm*1860mm
Connector Size DN50

Application Data:

Pure Water Flux 12,000L/H (0.15MPa, 25C)
Designed Flux 40-120L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.15MPa
Maximum Backwashing Pressure 0.15MPa
Air Washing Volume 0.1-0.15N m3/m2 .hr
Air Washing Pressure ≤ 0.1MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 25NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVDF
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

Hot Selling for Filter Fiber - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo detail pictures

Hot Selling for Filter Fiber - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo detail pictures


Related Product Guide:

Our enterprise insists all along the standard policy of product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff as well as consistent purpose of reputation first, client first for Hot Selling for Filter Fiber - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Haiti, San Diego, Algeria, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
  • The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Jean from Salt Lake City - 2018.05.13 17:00
    Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be excellent business partner.
    5 Stars By Jerry from Austria - 2017.11.20 15:58
    Write your message here and send it to us