Manufacturer for Membrane Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo
Manufacturer for Membrane Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water Output Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering Direction | Outside-in |
| Membrane Material | Reinforced Modified PVDF |
| Precision | 0.03 micron |
| Membrane Area | 30m2 |
| Membrane ID/OD | 1.0mm/ 2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint Size | Φ24.5mm |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH Range | 5-9 (2- 12 when washing) | Neutral PH is better for bacterial culture |
| Particle Diameter | <2mm | Prevent sharp particles to scratch membrane |
| Oil & Grease | ≤2mg/L | Prevent membrane fouling/sharp flux decrease |
| Hardness | ≤150mg/L | Prevent membrane scaling |
Application Parameters
| Designed Flux | 15~40L/m2.h |
| Backwashing Flux | Twice the designed flux |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested Operating Pressure | ≤-35KPa |
| Maximum backwashing Pressure | 100KPa |
| Operating Mode | Continuous opeartion, intermittent backwashing air flushing |
| Blowing Mode | Continuous Aeration |
| Aeration Rate | 4m3/h.piece |
| Washing Period | Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Manufacturer for Membrane Filter - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Peru, Chile, Los Angeles, As a way to use the resource on the expanding info in international trade, we welcome prospects from everywhere on the web and offline. In spite on the high quality objects we offer you, effective and satisfying consultation service is supplied by our qualified after-sale service group. Item lists and in depth parameters and any other info weil be sent to you timely for the inquiries. So you should make contact with us by sending us emails or call us when you've got any questions about our organization. ou could also get our address information from our site and come to our enterprise. We get a field survey of our merchandise. We're confident that we are going to share mutual accomplishment and create solid co-operation relations with our companions within this market place. We're seeking forward for your inquiries.
By Daniel Coppin from Sri Lanka - 2018.06.19 10:42
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Jerry from Nairobi - 2018.06.30 17:29
Write your message here and send it to us
Products categories
-
Factory Cheap Hot Drinking Water Filter - MBR ...
-
Low price for Hollow Fiber Membrane - UF Membr...
-
Manufactur standard Water Membrane - UF Membra...
-
Renewable Design for Mbr Wastewater Treatment P...
-
China Factory for Water Filter For Drinking Wat...
-
Manufactur standard Water Membrane - MCR Membr...