Online Exporter Membrane Bioreactor System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Bioreactor Wastewater Treatment , Ultra Filtration , Membrane Separation Technique , Any needs from you'll be paid out with our notice!

Online Exporter Membrane Bioreactor System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No.	Item	Output Index
1	TSS	≤1mg/L
2	Turbidity	≤1
3	CODcr	Removal rate depends on the bio-chemicalperformance & designed sludge concentration(Instant removal rate of membrane is ≤30% without bio-chemical function)
4	NH3-H

Specifications

product-description1

Technical Parameters

Structure	Outside-in
Membrane Material	Reinforced Modified PVDF
Pore Size	0.1 micron
Membrane Area	30m2
Membrane ID/OD	1.0mm/2.2mm
Size	1250mm×2000mm×30mm
Joint Size	Φ24.5mm

Application Parameters

Designed Flux	10~25L/m2.h
Backwashing Flux	Twice the designed flux
Operating Temperature	5~45°C
Maximum Operating Pressure	-50KPa
Suggested Operating Pressure	≤-35KPa
Maximum backwashing Pressure	100KPa
Operating Mode	8/9min on+2/1min pause
Aeration Mode	Continuous Aeration
Aeration Rate	4m3/h.piece
Washing Period	Clean water backwashing every 2~4h; CEB every 2~4 weeks;CIP every 6~12 months. *Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not easy to foul.

Item	Value	Remark
PH	Operate: 5-9Wash: 2-12	Neutral PH is good for bacteria culture
Particle Diameter	<2mm	Sharp particles will scratch membrane
Oil & Grease	≤2mg/L	High content will affect membrane flux
Hardness	≤150mg/L	High content will cause fouling

Component Material

Component	Material
Hollow Fiber Membrane	Reinforced Modified PVDF
Sealing Compound	Epoxy Resins + Polyurethane (PU)
Housing	ABS

Product detail pictures:

Related Product Guide:

The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Online Exporter Membrane Bioreactor System - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Guyana, Myanmar, Marseille, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Cross Flow Ultrafiltration