Original Factory Membrane Process In Water Treatment - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Cross Flow Membrane , Ultrafiltration Membrane , Membrane Biological Reactor , Quality, honesty and service is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.
Original Factory Membrane Process In Water Treatment - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo Detail:

Applications

● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:

No. Item Water Output Index
1 TSS ≤1mg/L
2 Turbidity ≤ 1

Specifications

Size

product-description1

Chart 1 MBR Size

Technical Parameters

Filtering Direction Outside-in
Membrane Material Reinforced Modified PVDF
Precision 0.03  micron
Membrane Area 25m2
Membrane ID/OD 1.0mm/ 2.2mm
Size 785mm×2000mm×40mm
Joint Size DN32

Component Material

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS

Using Conditions

Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.

Item Limit Remark
PH Range 5-9 (2- 12 when washing) Neutral PH is better for bacterial culture
Particle Diameter <2mm Prevent sharp particles to scratch membrane
Oil & Grease ≤2mg/L Prevent membrane fouling/sharp flux decrease
Hardness ≤150mg/L Prevent membrane scaling

Application Parameters

Designed Flux 15~40L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode Continuous opeartion, intermittent backwashing air flushing
Blowing Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months

(Above information is for reference only, please adjust

according to actual differential pressure change rule)


Product detail pictures:

Original Factory Membrane Process In Water Treatment - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo detail pictures


Related Product Guide:

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for Original Factory Membrane Process In Water Treatment - MCR Membrane Module Reinforced PVDF BM-SLMCR-25 Surface Water Purification – Bangmo , The product will supply to all over the world, such as: South Korea, Johannesburg, Kazakhstan, All our staffs believe that: Quality builds today and service creates future. We know that good quality and whole heartedly service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the . Once Selected, Perfect Forever!
  • The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Fay from Belgium - 2018.10.09 19:07
    This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Cindy from Kuwait - 2017.03.28 16:34
    Write your message here and send it to us