professional factory for Hollow Fibre Filtration - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Water Purification Membranes , Anaerobic Mbr , Membrane Solutions Water Filter , We sincerely expect exchange and cooperation with you. Let us move forward hand in hand and achieve win-win situation.
professional factory for Hollow Fibre Filtration - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, spring water, or other sterile liquid.
  • Drinking treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity <0. 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 16m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ160mm*1415mm
Connector Size DN32

Application Data:

Pure Water Flux 4,700L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

professional factory for Hollow Fibre Filtration - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures

professional factory for Hollow Fibre Filtration - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures


Related Product Guide:

We believe that long expression partnership is often a result of front end of range, value added service, prosperous encounter and personal contact for professional factory for Hollow Fibre Filtration - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: Malaysia, Stuttgart, Sweden, We have many years' experience in hair product production, and our strict QC Team and skilled workers will ensure that we give you high quality hair products with the high hair quality and workmanship. You will get successful business if you choose to cooperate with such a professional manufacturer. Welcome your order cooperation!
  • After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
    5 Stars By Kevin Ellyson from Mumbai - 2017.04.08 14:55
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By John biddlestone from Rwanda - 2018.06.18 17:25
    Write your message here and send it to us