Super Lowest Price Ultrafiltered Water - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

No matter new consumer or outdated shopper, We believe in lengthy expression and trusted relationship for Membrane Bioreactor Process , Mbr Treatment Plant , Osmosis Filter , We've been prepared to cooperate with company friends from at your home and overseas and produce a wonderful future with each other.
Super Lowest Price Ultrafiltered Water - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, spring water, or other sterile liquid.
  • Drinking treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity <0. 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 16m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ160mm*1415mm
Connector Size DN32

Application Data:

Pure Water Flux 4,700L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

Super Lowest Price Ultrafiltered Water - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures

Super Lowest Price Ultrafiltered Water - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures


Related Product Guide:

Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Super Lowest Price Ultrafiltered Water - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: Kazakhstan, El Salvador, Tunisia, For anyone who is keen on any of our items right after you view our product list, you should definitely feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it's easy, you may locate out our address in our web-site and come to our business for far more information of our merchandise by your self. We're always ready to construct extended and steady co-operation relations with any possible customers in the related fields.
  • The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
    5 Stars By Joanna from Atlanta - 2018.06.26 19:27
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Merry from Brasilia - 2017.10.27 12:12
    Write your message here and send it to us